Unclogging a Drain: Tips and Tricks

 Unclogging a Drain: Tips and Tricks


Unblocking a clogged drain can be a complicated and annoying job, especially if you have no idea what you’re doing. Although there’s a wide range of chemical solutions you can use to unplug a drain, they emit harsh fumes which can damage your plumbing when not used properly. Here’s a quick guide to help you with drain cleaning without the drain repairs use of toxic products.

Identify the Blockage

Before you get to work you need to be sure that there’s a blockage in your drain. First, make sure that your sink, bath or toilet isn’t draining away properly. If that’s the case, then this is probably the result of a blocked drain.

Once you’ve confirmed that there’s a blockage, stop emptying water into the drain, as this will make the problem worse.

Before attempting to unblock the drain ensure that you’re wearing protective clothing like gloves and goggles to protect your skin and eyes from any particles, dirt or debris.

How to Unclog a Drain

The easiest and most straight-forward way to unblock a drain is by using drain rods. These inexpensive and effective tools can be purchased at most hardware stores. Make sure that you’ve put on your gloves and goggles before you proceed with the unblocking. Ready? Let’s get started.

Remove the cover – lift the drain’s inspection cover using a screwdriver


Clear the obstruction – here’s where the rod comes in place. Use it with a plunger extension to dislodge the blockage. Keep in mind that this process may take a couple of minutes of turning and twisting before you completely clear the obstruction


Flush – once you’ve tackled the blockage, flush the drain to remove any remaining dirt, debris or particles blocking it

How to Prevent Future Blockages



Leave a Comment